Height Safety for the Workplace 

 MultiRail Horizontal Rail System 

The MultiRail Horizontal Anchorage Device is a new type of personal safety system combining all the advantages of wire rope-based and rail-types stationary systems. 
 
MultiRail offers a very wide range of installation possibilities and guarantees protection against falls in hazardous zones, in accordance with European Standards. 

 How it works 

Wearing a full body harness and energy absorbing lanyard the user simply attaches to the MultiRail Glider and can walk the full length of the system freely without having to interact with the system. 
 
If the event of a fall the user’s energy absorbing lanyard will deploy and if there is enough load the Rail will bend to take the reduce the load on the user and the structure. 
 

 Installation Positions 

Floor Level Installation (Fall Factor 2) – this installation would ideally be used in Fall Restraint 
 
 
Waist Height Installation (Fall Factor 1) – this installation can be used for fall arrest or restraint and can also provide a handrail. 
 
Above Head Installation (Fall Factor 0) – this installation provides the safest solutions when there is a fall risk and can be used in fall arrest or fall restraint. 

 MULTIPLE BENEFITS: 

Fixing centres can be up to 4m and it is certified for simultaneous use by up to 6 persons. In the case of a fall, the resultant forces are absorbed by the intermediate brackets therefore the end fixings loads are much lower than in the case of cable lifeline systems. Rail based systems provide lower inspection and maintenance costs MultiRail can be customised to your building or structure design. Resilient materials help the longevity of the product; Stainless Steel product line is resistant in the toughest environmental conditions. Aluminium system provides the best price/quality solution for low-corrosive work environments. 

 Fully Tested and Compliant 

MultiRail has been fully tested according to the European Guidelines for personal safety equipment. 
 
The Söll MultiRail Horizontal Rail System conforms to the latest European standard EN 795:2012 type D regulations for horizontal anchor devices 

 Solution for façade workers in suspension 

The Söll MultiRail® system can now be used as an abseiling Rail, allowing people to work in suspension on façades (cleaning, painting, maintenance etc.) in a stainless steel version and provides a safe and ergonomic anchorage solution. Unlike other abseiling rails the MultiRail system has a discrete design allowing it to be almost un-noticed ensuring that the ascetics of the building are not jeopardised. 
 
Our Lock able Gliders allow users to work from a fixed position on the rail reducing possibility of swing movement from wind. 

 Suitable for working in suspension under the following conditions: 

Maximum 2 users per system The structure is rigid enough that no deformation occurs during usage Connection to two mobile anchor points (gliders), one for suspension and one for fall protection on the same rail 
 

 MultiRail systems are used in conjunction with the following gliders:  

Söll Closed MultiRail Glider (part No. MRG-17407) 
Söll Openable MultiRail Glider (part No. MRG-17792) 
Söll Lockable MultiRail Glider (part No. MRG-26308) 
Söll MultiRail Wheeled Trolly (part No. MRG-24168) 

 Product Downloads 

Aluminium MultiRail Product Catalogue - technical catalogue including dimensions, materials and features. 
 
Stainless Steel MultiRail Product Catalogue - technical catalogue including dimensions, materials and features.